Orthogonal regression method was adopted to optimize the process of needle tea by 6CZZ-600 tea shape machine. The result showed that shaping temperature had a significantly effect on the content of tea polyphenol and chlorophyll, and leaf weight had a significantly effect on amino acid and chlorophyll, but the turning rate had little effected on them. The content of amino acid and soluble sugar increased first, and then declined according to the rising temperature, the content of tea polyphenol and chlorophyll declined all along. Too high temperature accelerated the reducing of chlorophyll, but shaping in low temperature would lead to a boring aroma. The content of tea polyphenol and chlorophyll declined according to the increasing of leaf weight, but the content of amino acid and soluble sugar increased first, and then declined. Too much leaf would lead to bad color of green tea, but too little could not achieve good quality of tightness and thinness. Combination the demand of excellent needle tea quality and the efficiency of producing, the optimized mechanical process of excellent needle green tea was: leaf weight was 100βg to 150βg per trough, at 90℃ to 110℃, rotate rate was 184βr/min to 192βr/min.
YU Zhi
,
YANG Yan
,
ZHOU Ji-rong
,
NI De-jiang
. Study on the Process of Machine-processed Needle-Shaped Famous Tea[J]. Journal of Tea Science, 2007
, 27(4)
: 311
-315
.
DOI: 10.13305/j.cnki.jts.2007.04.009
[1] 钟映富, 周正科, 胡翔, 等. 振动理条对针形名茶品质的影响[J]. 中国茶叶, 2002, 24(1): 32~33.
[2] 司辉清, 庞晓莉. 机制针形名优茶绿茶工艺研究[J]. 西南农业大学学报, 2004, 25(4): 370~373.
[3] 袁芳亭, 陈玉琼, 张玉涛. 形温度和投叶量对机制条形名茶品质的影响[J]. 华中农业大学学报, 2001, 20(2): 185~187.
[4] 陈玉琼, 倪德江. 针形名优茶机械化加工技术[J]. 茶叶, 1999, 25(3): 174.
[5] 田波平, 孙秋梅, 廖庆喜, 等. 6CZZ2600型针形名优茶做形机及成型工艺优化[J]. 农业工程学报, 2005, 21(4): 65~68.
[6] 盖钧镒. 试验统计方法[M]. 北京: 中国农业出版杜, 2000.
[7] 商业部茶叶畜产局, 商业部杭州茶叶加工所. 茶叶品质理化分析[M]. 上海科学技术出版社, 1989.